If the
Portland Saturday Market can have a Festival of the Last Minute, so can I! So here goes the first Ornament Demo of this year's Festival, for all my fellow decorating procrastinators and snowbound crafters!
For the big Cake and Pie Ornament Swap, I turned matchboxes into little birdhouses . . . and here's the Demo to prove it . . .
1. Start with matchboxes - and open up the outer part. Punch a 7/8" hole in the front, and gesso those babies! My 7/8" punch was so big that I had to open them up to punch them - but you may not have to open them up with a smaller punch . . .
2. Put two layers of gesso on . . .
3. Now glue the outsides back together - I used Crafter's Pick Ultimate Glue, but Aleene's Tacky Glue would also work well. I used paper clips to hold the parts together while they were drying.
Ok, I love this paperclip shot,so you get a little extra.
4. Get some green acrylic paint, and paint the outside.
5. I gessoed the interior boxes, but you don't really need to. I do, however, recommend taking your 1/16" hole punch and punching holes in one end . . .
6. This will make it easier to poke the brads through, making a little drawer pull for the box.
7. Because I was doing multiples, I made one collage with some hand drawn birds and photocopied it. I starting by making a little template based on the inside of the matchbox. Then, I blew it up 200%, made my drawing/collage (I used shredded paper to make the nest), and then photocopied it again at 49%!
8. I used the template to trim the image to the perfect size, and folded it so it would fit.
9. I coated the inside of the box with matte medium . . .
10. And pressed the paper in. I used extra matte medium where the brad was so that the paper would adhere properly.
11. Next, it was time for the little surprise! I had also photocopied little gifts. I cut out tiny bits of foam core . . .
12. . . . And glued it down. I used Beacon's 3-in-1 just because it was handy, and it comes out of the bottle easily. You could use any craft glue.
13. Then, another dab of glue, and the little present is right there in 3D!
14. I made a little roof template and traced it out on some red posterboard I had.
Action shot!
15. Here you can see how it folds to make a little roof!
16. Where the roof tab overlaps, I slipped in a bit of ribbon to create a hanger. I used Ultimate Glue to secure it . . .
17. . . . And a paperclip to hold it while it dried.
18. I applied glue to the back of the roof piece . . .
19. I slipped it inside the exterior cover and held it in place while it set.
20. Poof! It's a little birdhouse, with a birds and nest inside! I also painted the top of the interior box red to match the roof, cause I was just being, well, you know, like that.
21. And still, it seemed like it needed a little more . . . so I added some Elmer's . . .
22. And some antique style mica glitter. You can also add a little on the roof for an extra accent.
And you're done!
Hope you're having a great holiday season.